Needle Tweezers – Tipped Hole Maker

Product Description

Needle Tweezers – Tipped Hole Maker

The Needle Tweezers – Tipped Hole Maker is designed by us to make loops and holes for donuts, beads, sculpting animal eyes, pendants and etc.

How to use it:

1. You only need to place certain amount of glass, shaped like a tall bump at the desired location.

2. Heat up just the bump until melting temperature.

3. Quickly place the needles of the Needle Tweezers – Tipped Hole Maker to the center of the heated bump and squeeze together.

4. As soon as the tips touch, move the handle back and forth a couple of times in a motion that makes the points rotate in the center of the hole. This motion breaks apart the thin wall, otherwise there will be a bridge across the middle of the hole.

4. Remove the Needle Tweezers – Tipped Hole Maker and reheat the glass area making up the hole, be very careful and don’t melt the glass until the hole gets closed.

5. Again place the Needle Tweezers – Tipped Hole Maker in the hole and stretch out the hole to the desired size and shape.

To make a large loop, simply start with a larger bump of glass.
You may also need to reheat more than one time.

For a wider loop, start with a bump that is slightly oval shaped at its base.

The total inside needle length measures about 1.65″ with each piece of needle measuring 0.9″. Total length of the Tipped Hole Maker measures around 7″.
The tweezers have a wide handle for comfortable holding in hand.

The Needle Tweezers – Tipped Hole Maker have a good springiness that allows full and smooth exit of needle from the tall bump.

If you want to do the hole wider you should use our Graphite Reamer for more precise and comfortable use.
It’s best tool with best quality.